KN95 / N95 abin rufe fuska ta atomatik
Ma'auni na Fasaha & Buƙatun Kanfigareshan
(1) Matsayin Ƙirƙira: Dangane da gefen zanen samfurin da ƙungiya ta farko ta samar;
(2) Kayan aiki masu nauyi: 3000KG;
(3) UPH: sama da 2400;
(4) Yawan cancanta: 98%;
(5) Rashin gazawar kayan aiki: 2%;
(6) Yawan ma'aikata:1;
(7) Yanayin sarrafa lantarki: PLC;
(8) Yanayin tuƙi: servo motor;
(9) Kwamitin sarrafawa: allon taɓawa + maɓallan;
(10) Girman kayan aiki: 9800mm (L) × 1500mm (W) × 2100mm (H);
(11) Launin kayan aiki: Fari: HCV-N95-A;
(12) Ƙarfin wutar lantarki: lokaci guda: 220V, 50HZ, ƙarfin da aka kiyasta: kimanin 14KW;
(13) Matsakaicin iska: 0.5～0.7 MPa, kwarara: game da 300L / min;
(14) Muhalli: yanayin zafi: 10 ~ 35 ℃, zafi: 5-35% HR, babu flammable, iskar gas, bita tare da ma'auni na ba kasa da 100000 matakin ƙura ba;
Manyan Abubuwan Kayan Aikin
| A'a. | sunan bangaren | yawa | magana |
| 1 | Tufafi mai tace ruwa /narke-busa tufa/ nadi na ruwa mai karɓuwa Layer lodi | 6 | |
| 2 | mirgine lodin layin hanci | 1 | |
| 3 | Tuƙi & yankan gadar hanci | 1 | |
| 4 | Tsarin rufewa gefen | 1 | |
| 5 | Tsarin tuƙi mai tufa | 1 | |
| 6 | tsarin waldawar kunne-band | 2 | |
| 7 | blanking tsarin | 1 | |
| 8 | Tsarin aiki | 1 | |
| 9 | Hukumar gudanarwa | 1 | |
| 10 | Walda mai riko da hannu | 1 | Zaɓi, don mirgina tufafi |
| 11 | Tsarin Punching & Yanke ramukan Bawul ɗin Numfashi | 1 | Zaɓi, shigar akan layi ta atomatik |
| 12 | Welder don Manual numfashi bawul | 1 | Zaɓaɓɓen, aiki da hannu a layi |
Kayayyakin da aka kawo & ƙayyadaddun ƙayyadaddun bayanai
| aikin | nisa (mm) | waje diamita na nadi abu (mm) | diamita na ciki na caja ganga (mm) | nauyi | magana |
| rigar da ba a saka (haɗe da fuska) | 230-300±2 | Φ600 | Φ76.2 | Max 20kg | 1 Layer |
| rigar da ba a saka ba (Layer mafi girma) | 230-300±2 | Φ600 | Φ76.2 | Max 20kg | 1 Layer |
| tace Layer a tsakiya | 230-300±2 | Φ600 | Φ76.2 | Max 20kg | 1-4 Layer |
| Tushen gadar hanci | 3-5± 0.2 | Φ400 | Φ76.2 | Max 30kg | 1 yi |
| bandejin kunne | 5-8 | - | Φ15 | Max 10kg | 2 Rolls/kwali |
Amintaccen kayan aiki
Bukatun aminci na kayan aiki
(1) Zane na kayan aiki ya dace da ka'idar na'ura-na'ura, aiki mai dacewa da aminci, kuma dukkanin kayan aiki suna da tabbaci kuma abin dogara.
(2) Za a samar da kayan aiki tare da kyawawan matakan kariya na tsaro.Za a samar da sassa masu jujjuya da haɗari a kan kayan aikin tare da na'urorin kariya da alamun aminci, kuma aminci da kare muhalli ya dace da ka'idodin ƙasa.
Bukatun aminci na lantarki
(1) Dukan injin ɗin yana sanye da bawul ɗin da aka yanke na samar da wutar lantarki da tushen iska don tabbatar da babu haɗari yayin kiyayewa.
(2) Za a saita tsarin sarrafawa a wurin da ya dace da mai aiki don aiki da lura.
(3) Tsarin kula da wutar lantarki na kayan aiki yana da ayyuka na kariya mai yawa da kariya ta gajeren lokaci.
(4) Ana sanye take da ma'auni na ma'auni na rarrabawa don hana lalatawar wayoyi.
